how to fix the inevitable flatPosted: November 24, 2013
Are you like me and hate changing a flat so much that if at all possible, you’ll limp along for as long as you can with a tube that’s failing? Dumb, huh?
I usually lose tubes due to punctures or eventual failure at the valve stem. I’m obsessive about checking my tire pressure before every ride so my valves get quite the workout. There’s no mistaking that “sssssssssss” when you press your pressure gauge onto a stem and it starts leaking.
But this time my back tire kept losing more than the 1-2 psi it usually loses overnight. At first I thought that it had to be due to the weather. After all, when I’m done riding my tires are much warmer than they are the next morning, when they’ve been sitting on my cold balcony all night, the rubber contracting from the cold. Then it lost 5 psi overnight. Then 10. Oops, now it lost 20 psi. Seeing that it was a slow leak I knew there wasn’t a hole to patch; the tube needed to be replaced.
Tires can lose pressure when the tire tread gets worn, and I worried it might be time to replace my tires. I have probably 4,000-5,000 miles on this set, and although I’ve rotated them about half-way through they are getting worn. But the cheapest way to find out if it’s the tire or the tube is to just replace the tube and see what happens. Thankfully, that’s all it was – just a tube that had been getting weak and losing its elasticity – although I procrastinated because changing a tube isn’t the easiest thing in the world if your tires are like mine – they have a stiff bead and they’re hard to get on and off my rims. But now that I’ve got a nice new tube in there and my “tuffy liners” are protecting it from punctures I’m happily pedaling along again without worry.
To help you, here is a fantastic video from Bicycling.com that shows how to change a tube. The guy is a pro and he makes it look easy, but it really isn’t hard. For me, the hardest part is working the tire back onto the rim. Once you get it on your rim make sure you inflate it only part way, then check thoroughly to see that none of the tube is being pinched – you will get a pinch flat if so. What I do is massage the tire and the tube all the way around the rim a few times, then inflate the tire a little and spin it, holding my fingers lightly against the sides of the tire and along the bead of the tire. I visually check to see if there are any spots that look uneven. Once I’m satisfied it’s perfect then I fill it up with air and do a final spin check. Then I’ll check a few hours later to see if it’s holding. Like I said, I’m a bit obsessive about my tires.
Of course, you can always take your bike to the shop to change a tube but I firmly believe everyone who rides regularly needs to know some basic skills, starting with fixing a flat. A nice side benefit is that you feel a real sense of accomplishment once you fix your own flat. Empower yourself!
- How To Repair Your Bicycle – The Best Way To Take Care of a Flat Bicycle Tire (kevinhtrb.wordpress.com)
- Skill Builder: Fixing a Flat (makezine.com)